Dinam led strip complies with below concrete stadards.
Materials
- Taiwan Epistar chip or Edison Lumenmax chip,
- Dow Corning silicone resin for SMD package,
- American Intimatix phosphor for SMD package,
- 99.9% gold wire bonding for SMD package,
- PCB width over 10mm or 12mm
- PCB by two layers: top layer 1 oz=35µm, rear layer 2 OZ=70µm
- PCB by double layer double face, rolled copper
- Flat cable 2468 22AWG red/black at both ends 350mm long
Electicals
- Against 2000V electrostatic discharge (ESD).
- 5% input voltage allowed (23-25VDC or 11.5-12.5VDC).
-High overload protection. e.g. 12V tapes mistakenly to 24V driver for seconds, other tape may burn out and ours still okay for use.
Photometrics:
- 2000K, 2400K, 2700K, 3000K, 4000K, 5000K, 6000K, 10000K of white colors,
- Ultraviolet, amber, red, blue, green, RGB, RGBW colors optional,
- 4 step MacAdam for warm white binning, 5 step MacAdam for cold white
- RA coming to 80 generally